Press Center
 
Home About us Products Support Quality & Certification Career Contact us
• Power Management
    Linear Regulators
    Low Dropout Linear Regulators
    DDR Termination Regulators
    Shunt Reference Regulators
    Step Down Switching Regulators
    Switching Regulator
    Step-Up DC-DC Converter
    PWM Controller
    White LED Driver
    Supervisory Circuit
    Voltage Detection and System R
    USB Power Switch
    Power Factor Control
    Li-Battery Protection or Charg
    FET Bias Controllers
    Combo IC
    Inverting DC-DC Converter
• Amplifier / Comparator
    Audio Amplifiers
    Operational Amplifier
    Voltage Comparator
• Analog Switches
    Video Signal Switch
    Analog Multiplexers, Demultipl
• Hall ICs
• Special Application ICs
    Motor Controller IC
    Interface and Driver Circuit
    Telecommunication Circuit
    Melody IC
    Alarm /Sound Generator IC
    Remote Controller IC
    Television Circuit
    Leakage Current Detector
    Automotive IC
    A-D or D-A Converters
    Miscellaneous
    Radio and Cassette Recorder Ci
    Timer
    Mouse&Keyboard Controller
    Transient Voltage Suppressors
    Sense Monitor
    Video Filter
    ZCB snubber
• Logic
• TRANSISTORs
• MOSFETs
    JFET
    Power Mosfet
• TRIACs
• SCRs
• DIODEs
 
Home >
PA7468 Datasheet
STEREO 2.6W AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL


 
DESCRIPTION

As an audio power amplifier with DC volume control, UTC
PA7468 is a stereo bridged audio power amplifier. In normal
operation it can produce 2.6Ω (1.8W) into 4W with less than 10%
(1.0%) THD+N.  
In UTC PA7468, the attenuator range of the volume control is
from 20dB (@DC_VOL=0V) to -80dB (@DC_VOL=3.54V) with 32
steps. Besides, the UTC PA7468 includes the depop circuitry and
the thermal shutdown protection circuitry (to reduce pops and clicks
noise during power up or shutdown mode operation).
The UTC PA7468 has a BTL mode for speaker drive and a SE
mode for headphone drive. These tow modes can be quickly chosen
by the SE/BTL   input control pin signal.
 


 
FEATURES
 
* Low Operating Current: 9mA
*Two Output Modes Allowable with BTL and SE Modes(chosen by SE/BTL pin)
*Low Current Consumption :1mA(in Shutdown Mode)
*With Short Circuit Protection
*With Thermal Shutdown Protection  
*With Over Current Protection Circuitry
*Eliminating Turn-on and Turn-off Transients in Outputs by Improved Depop Circuitry to.
*Very High PSRR
*32 Steps Volume Adjustable  
*BTL Mode :2.6W per Channel Output Power into 4Ω Load at 5V
About us  |  Products  |  Contact us
Copyright 2011 UTC All received