DESCRIPTION

The UTC UTR2136 is high voltage, high speed power MOSFET

and IGBT drivers with three independent high and low side

referenced output channels for 3-phase applications. Proprietary

HVIC technology enables ruggedized monolithic construction. Logic

inputs are compatible with CMOS or LSTTL outputs, down to 3.3V

logic. A current trip function which terminates all six outputs can be

derived from an external current sense resistor. An enable function is

available to terminate all six outputs simultaneously. An open-drain

FAULT signal is provided to indicate that an overcurrent or

undervoltage shutdown has occurred. Overcurrent fault conditions are

cleared automatically after a delay programmed externally via an RC

network connected to the RCIN input. The output drivers feature a

high pulse current buffer stage designed for minimum driver

cross-conduction. Propagation delays are matched to simplify use in

high frequency applications. The floating channels can be used to

drive N-channel power MOSFETs or IGBTs in the high side

configuration which operates up to 600V.

FEATURES

* Floating channel designed for bootstrap operation

* Fully operational to +600V

* Tolerant to negative transient voltage, dV/dt immune

* Gate drive supply range from 10V to 20V

* Undervoltage lockout for all channels

* Over-current shutdown turns off all six drivers

* Independent 3 half-bridge drivers

* Matched propagation delay for all channels

* Cross-conduction prevention logic

* Low side output out of phase with inputs. High side outputs out of phase

* 3.3 V logic compatible

* Lower di/dt gate drive for better noise immunity

* Externally programmable delay for automatic fault clear